With the multiple updates that changed the tail light design, the Land Cruiser 200 can be a tricky model to purchase a replacement tail light for. This guide is here to make your life easier – it will help you identify the correct tail light assembly for your Land Cruiser 200, going through the different types of tail lights used across the various model years. You’ll also learn about the Land Cruiser 200’s four-piece tail light layout and how that will impact shopping for a replacement,as well as what to check for when buying a used OEM replacement.
If you think you’ve jumped the gun and are still unsure whether your Land Cruiser 200’s tail lights actually need replacing, head over to our faulty tail light diagnosis and fix guide here.
Quick Reference: Land Cruiser 200 Tail Lights by Generation
| Generation (years) | Tail light setup | What to check when buying |
| Land Cruiser 200 pre-facelift (2008-2011) | Bulb-type lamps, four-piece layout | Confirm body vs tailgate piece and correct side |
| Land Cruiser 200 facelift (2012-2015) | Revised lens, bulb-type on most trims | Match the facelift lens; it differs from pre-2012 units |
| Land Cruiser 200 second facelift (2016-2021) | Restyled lamps, LED on higher trims | Match the trim: LED units differ from bulb-type |
Identify Your Land Cruiser 200 and Tail Light Type
Before ordering a replacement tail light, it’s imperative that you identify exactly which version of the Land Cruiser 200 you own. Although the 200 Series was produced from 2007 to 2021, there were two major facelifts that changed the rear lamp design and fit.
2007 to 2011 models use the original tail light design with conventional reflector styling. The 2012 facelift introduced redesigned rear combination lamps featuring a double-cylinder internal layout, larger turn indicators, LED rear lighting, and reverse lamps relocated beside the license plate The second facelift in 2016 replaced the earlier lamps with light-tube-style LED tail lights connected visually by a full-width chrome garnish across the tailgate.
Body-Mounted vs Tailgate Tail Lights: Which Piece You Need
Replacing your Land Cruiser 200’s damaged rear lamp isn’t always as simple as ordering a left or right tail light. The Land Cruiser 200 uses a four-piece tail light system, which means that the outer lamps are mounted on the rear quarter panels, and inner lamps on the tailgate.
These lamps are position-specific, and are sold as individual components, each with its own Toyota part number. The good news is that because the tail lights on each side are split into two units, you won’t have to replace the entire assembly if just one portion is faulty. For example, if the lamp attached to the body beside the left rear quarter panel is cracked, you only need to replace it with the outer assembly for the corresponding side.
Removing and Fitting a Land Cruiser 200 Tail Light
The removal process depends on which of the Land Cruiser 200’s four tail light sections you’re replacing.
The outer tail lights, mounted on the rear quarter panels, are accessed from inside the cargo area. Open the tailgate and remove the interior access cover or trim panel to reach the retaining nuts. Once the fasteners are removed, carefully pull the lamp straight rearward to release the locating pins, then disconnect the electrical connector by pressing its locking tab.
The inner tail lights, which are mounted on the tailgate, have to be accessed from the inside of the tailgate itself. Remove the interior tailgate trim panel to expose the retaining fasteners and wiring. After disconnecting the electrical connector, the tail light assembly can be lifted away from the tailgate.
To install the replacement lamp, carry out the preceding steps in reverse, finally testing the tail light, brake light, turn signal, and reverse light before fitting and fastening any interior trim. For the complete replacement procedure, see our How to Replace a Tail Light Assembly here.
Buying a Used OEM Land Cruiser 200 Tail Light: What to Match
Going the used OEM route is a great alternative to buying a brand-new OEM tail light for your Land Cruiser 200, as long as you get the right unit. First, you’ll have to determine whether your vehicle is a pre-facelift (2007–2011), first facelift (2012–2015), or second facelift (2016–2021) model, as the tail lights for the Land Cruiser 200 were revised during both updates. This will include a confirmation of the bulb type. Earlier Land Cruiser 200 tail lights use replaceable bulbs, while later facelift versions may use integrated LEDs depending on the market and trim level.
Next, determine whether you need the outer body-mounted lamp or the inner tailgate-mounted lamp, as these are separate assemblies with different part numbers. Be sure to order the correct side, since left- and right-hand lamps are not interchangeable.
Whenever possible, match the Toyota part number from your original lamp or verify compatibility using your VIN to ensure the replacement will fit and operate correctly.
Frequently Asked Questions
Which tail light assembly fits my Land Cruiser 200?
The correct tail light depends on your Land Cruiser 200’s model year, facelift version, side of the vehicle, and whether you need the outer body-mounted or inner tailgate-mounted lamp.
What is the difference between the body and tailgate tail lights on a Land Cruiser 200?
The outer body lights sit on the rear quarter panels, while the inner tail lights are mounted on the tailgate. They are separate assemblies and have different part numbers.
Are used OEM Land Cruiser 200 tail lights reliable?
Yes, provided they are in good condition. Check for cracks, moisture, damaged mounting points, and faulty connectors before purchasing.
How do I tell which Land Cruiser 200 generation I have?
You can confirm the exact specification and generation of your Land Cruiser 200 using your vehicle identification number (VIN). Visually, 2007–2011 models have the original front and rear design, with larger, more rounded headlights, a simpler grille, and tail lights with a traditional red-and-clear lens layout. 2012–2015 models that received the first facelift, are identifiable by a larger grille,updated tail lights with a different internal pattern and LED rear lighting elements. 2016–2021 models have slimmer LED headlights, a larger grille with more prominent horizontal styling, a reshaped front bumper, and redesigned tail lights that extend onto the broad horizontal trim panel that runs across the tailgate between the two inner lamps.